Wednesday, February 23, 2011
AMPUTEE'S STUMP COVERS
This isn't my preferred "stump cover", I like the knit one. That said, people who don't knit want to make them for vets as well, so here you go.
AMPUTEE'S STUMP COVERS
NOTES:
1. Read instructions all the way through before beginning.
2. When joining with a slipstitch, pull the slipstitch tight.
3. Always use a soft washable yarn.
LEG COVER:
SIZE: To fit above the knee amputees
20-23 inches around, 12 inches long
MATERIALS:
Worsted weight yarn, approximately 4 ounces
I (5.5 mm) crochet hook (if you crochet loosely use a H hook)
Chain 5 and join to form a loop, ch 2 (don’t count as a dc of the next round)
ROUND 1: 12 dc in loop and over tail, join with a slipstitch, ch 2 (12 sts) (remember to not count the ch 2 as a dc)
Pull tail tight to close hole.
ROUND 2: 2 dc in ea st, join with a slipstitch. (24 sts)
ROUND 3: Ch 2, (dc in next st, 2 dc in next st) repeat around, join with a slipstitch. (36 sts)
ROUND 4: Ch 2, (dc in next 2 st, 2 dc in next st) repeat around, join with a slipstitch. (48 sts)
ROUND 5: Ch 2, (dc in 7 st, 2 dc in next st) repeat around, join with a slipstitch. (54 sts)
ROUND 6: Ch 1, sc in ea st, join with a slipstitch. (54 sts)
ROUND 7: Ch 2, (dc in 8 st, 2 dc in next st) repeat around, join with a slipstitch. (60 sts)
ROUND 8: Ch 1, sc in ea st, slipstitch around first dc as if to front post, be sure to skip the ch 2. (60 sts)
ROUND 9: Ch 3, *bpdc, around next dc, fpdc around next dc*, repeat from * around. Bpdc, around last dc, ending with slip stitch around ch 3, as if to front post. (60 sts)
Repeat round 9 until it measures approximately 12 inches from start.
Fasten off and weave in end.
SMALLER LEG COVER:
SIZE: To fit below the knee amputees
17-20 inches around, 12 inches long
MATERIALS:
Worsted weight yarn, approximately 4 ounces
I (5.5 mm) crochet hook (if you crochet loosely use a H hook)
Chain 5 and join to form a loop, ch 2 (don’t count as a dc of the next round)
ROUND 1: 12 dc in loop and over tail, join with a slipstitch, ch 2 (12 sts) (remember to not count the ch 2 as a dc)
Pull tail tight to close hole.
ROUND 2: 2 dc in ea st, join with a slipstitch. (24 sts)
ROUND 3: Ch 2, (dc in next st, 2 dc in next st) repeat around, join with a slipstitch. (36 sts)
ROUND 4: Ch 2, (dc in next 2 st, 2 dc in next st) repeat around, join with a slipstitch. (48 sts)
ROUND 5: Ch 2, (dc in 11 st, 2 dc in next st) repeat around, join with a slipstitch. (52 sts)
ROUND 6: Ch 1, sc in ea st, join with a slipstitch. (52 sts)
ROUND 7: Ch 3, *bpdc, around next st, fpdc around next st*, repeat from * around. Bpdc, around last st, ending with slipstitch around ch 3, as if to front post. (52 sts)
Repeat round 7 until it measures approximately 12 inches from start.
Fasten off and weave in end.
WRIST OR ANKLE COVER:
SIZE: To fit foot or hand amputees
12-14 inches around, 9 inches long
MATERIALS:
Worsted weight yarn, approximately 2 ounces
I (5.5 mm) crochet hook (if you crochet loosely use a H hook)
Chain 5 and join to form a loop, ch 2 (don’t count as a dc of the next round)
ROUND 1: 12 dc in loop and over tail, join with a slipstitch, ch 2 (12 sts) (remember to not count the ch 2 as a dc)
Pull tail tight to close hole.
ROUND 2: 2 dc in ea st, join with a slipstitch. (24 sts)
ROUND 3: Ch 2, (dc in next st, 2 dc in next st) repeat around, join with a slipstitch. (36 sts)
ROUND 4: Ch 1, sc in ea st, join with a slipstitch. (36 sts)
ROUND 5: Ch 1, sc in ea st, slipstitch around first dc as if to front post, be sure to skip the ch 2. (36 sts)
ROUND 6: Ch 3, *bpdc, around next dc, fpdc around next dc*, repeat from * around. Bpdc, around last dc, ending with slip stitch around ch 3, as if to front post. (36 sts)
Repeat round 6 until it measures approximately 9 inches from start.
Fasten off and weave in end.
NOTES:
1. Read instructions all the way through before beginning.
2. When joining with a slipstitch, pull the slipstitch tight.
3. Always use a soft washable yarn.
LEG COVER:
SIZE: To fit above the knee amputees
20-23 inches around, 12 inches long
MATERIALS:
Worsted weight yarn, approximately 4 ounces
I (5.5 mm) crochet hook (if you crochet loosely use a H hook)
Chain 5 and join to form a loop, ch 2 (don’t count as a dc of the next round)
ROUND 1: 12 dc in loop and over tail, join with a slipstitch, ch 2 (12 sts) (remember to not count the ch 2 as a dc)
Pull tail tight to close hole.
ROUND 2: 2 dc in ea st, join with a slipstitch. (24 sts)
ROUND 3: Ch 2, (dc in next st, 2 dc in next st) repeat around, join with a slipstitch. (36 sts)
ROUND 4: Ch 2, (dc in next 2 st, 2 dc in next st) repeat around, join with a slipstitch. (48 sts)
ROUND 5: Ch 2, (dc in 7 st, 2 dc in next st) repeat around, join with a slipstitch. (54 sts)
ROUND 6: Ch 1, sc in ea st, join with a slipstitch. (54 sts)
ROUND 7: Ch 2, (dc in 8 st, 2 dc in next st) repeat around, join with a slipstitch. (60 sts)
ROUND 8: Ch 1, sc in ea st, slipstitch around first dc as if to front post, be sure to skip the ch 2. (60 sts)
ROUND 9: Ch 3, *bpdc, around next dc, fpdc around next dc*, repeat from * around. Bpdc, around last dc, ending with slip stitch around ch 3, as if to front post. (60 sts)
Repeat round 9 until it measures approximately 12 inches from start.
Fasten off and weave in end.
SMALLER LEG COVER:
SIZE: To fit below the knee amputees
17-20 inches around, 12 inches long
MATERIALS:
Worsted weight yarn, approximately 4 ounces
I (5.5 mm) crochet hook (if you crochet loosely use a H hook)
Chain 5 and join to form a loop, ch 2 (don’t count as a dc of the next round)
ROUND 1: 12 dc in loop and over tail, join with a slipstitch, ch 2 (12 sts) (remember to not count the ch 2 as a dc)
Pull tail tight to close hole.
ROUND 2: 2 dc in ea st, join with a slipstitch. (24 sts)
ROUND 3: Ch 2, (dc in next st, 2 dc in next st) repeat around, join with a slipstitch. (36 sts)
ROUND 4: Ch 2, (dc in next 2 st, 2 dc in next st) repeat around, join with a slipstitch. (48 sts)
ROUND 5: Ch 2, (dc in 11 st, 2 dc in next st) repeat around, join with a slipstitch. (52 sts)
ROUND 6: Ch 1, sc in ea st, join with a slipstitch. (52 sts)
ROUND 7: Ch 3, *bpdc, around next st, fpdc around next st*, repeat from * around. Bpdc, around last st, ending with slipstitch around ch 3, as if to front post. (52 sts)
Repeat round 7 until it measures approximately 12 inches from start.
Fasten off and weave in end.
WRIST OR ANKLE COVER:
SIZE: To fit foot or hand amputees
12-14 inches around, 9 inches long
MATERIALS:
Worsted weight yarn, approximately 2 ounces
I (5.5 mm) crochet hook (if you crochet loosely use a H hook)
Chain 5 and join to form a loop, ch 2 (don’t count as a dc of the next round)
ROUND 1: 12 dc in loop and over tail, join with a slipstitch, ch 2 (12 sts) (remember to not count the ch 2 as a dc)
Pull tail tight to close hole.
ROUND 2: 2 dc in ea st, join with a slipstitch. (24 sts)
ROUND 3: Ch 2, (dc in next st, 2 dc in next st) repeat around, join with a slipstitch. (36 sts)
ROUND 4: Ch 1, sc in ea st, join with a slipstitch. (36 sts)
ROUND 5: Ch 1, sc in ea st, slipstitch around first dc as if to front post, be sure to skip the ch 2. (36 sts)
ROUND 6: Ch 3, *bpdc, around next dc, fpdc around next dc*, repeat from * around. Bpdc, around last dc, ending with slip stitch around ch 3, as if to front post. (36 sts)
Repeat round 6 until it measures approximately 9 inches from start.
Fasten off and weave in end.
Thursday, February 17, 2011
SIMPLE SCRUNCHIE PLUS
SIMPLE SCRUNCHIE PLUS
MATERIALS:
Worsted weight yarn, less than .5 ounces
I (5.5 mm) crochet hook
Ouchless (no metal) ponytail elastic, 1.25 (1.5) inch diameter
Tapestry needle
NOTES:
1. Read instructions all the way though before beginning.
2. If you want to use the longer elastic sc the number of stitches to cover the elastic, don’t stretch the elastic as you work over it.
3. Photo is made with Red Heart Super Saver.
4. I’ve also made this scrunchie with chunky yarn and a J (6.0 mm) hook.
5. See Photo 1, for placement of hook to crochet in the side of the sc.
Photo 1INSTRUCTIONS:
Round 1: Attach yarn around elastic with a sc. *Ch 8, slipstitch in the side of the sc, ch 8, sc around elastic. Repeat from * around. You want to fill the elastic, but not stretch it. End with ch 8, DO NOT join. Fasten off. Use your tapestry needle to join in the first sc.
With beginning and ending tails tie a tight knot. Rather than weave in the ends, put a drop of glue on the knot. After the glue dries trim the ends about ¼ inch away from knot. Or if you really want to, weave in the ends.
Round 1: Attach yarn around elastic with a sc. *Ch 8, slipstitch in the side of the sc, ch 8, sc around elastic. Repeat from * around. You want to fill the elastic, but not stretch it. End with ch 8, DO NOT join. Fasten off. Use your tapestry needle to join in the first sc.
With beginning and ending tails tie a tight knot. Rather than weave in the ends, put a drop of glue on the knot. After the glue dries trim the ends about ¼ inch away from knot. Or if you really want to, weave in the ends.
Wednesday, February 16, 2011
UPDATE ON SQUARES FOR PINE RIDGE RESERVATION PROJECT
4/1/2011 THIS PROJECT HAS CONCLUDED. I'M NO LONGER ACCEPTING SQUARES. THANK YOU EVERYONE WHO HELPED. WE SENT 3,002 SQUARES.
UPDATE ON SQUARES FOR PINE RIDGE RESERVATION PROJECT Much to my surprise and gratification we already met my goal of 2,500 squares. So many generous women helped on this project. Thank you all!
Reba C.
Irene C.
Ruth R.
Virginia J.
Judy C.
Vanessa H.
Lynda R.
Jo C.
Bonnie M.
Joyce A.
Darlene B.
Joyce H.
Wanda N.
Diane P.
Kris P.
Roberta T.
Ann H.
Cherie E.
Christine K.
Donna S.
Ann G T.
Suzanne
JoAnne B.
Ann P.
Sally H.
Silvia W.
Annemarie D.
Cheri D.
Morna C.
Catherine P.
Cindy N.
Mary K.
Lucille H.
Gerri M.
Peg J.
Terri M.
Lori R.
Sue B.
Arlene P.
Louise S.
Patricia W.
Laura B.
Fran H.
Barbara W.
Carol C.
Sharon N.
Linda L.
Laura P.
Jennifer R.
Sunday, February 13, 2011
BASKET WEAVE SLEEP SACK AND CAP
Many thanks to Cherie and Virginia for testing this pattern.
BASKET WEAVE SLEEP SACK AND CAP
MATERIALS:
Bulky weight yarn approximately 8 - 11 ounces including cap
K (6.5 mm) crochet hook
Yarn needle for weaving ends
GAUGE: 6 hdc = 2 inches
SIZES: Small, Medium and Large
NOTES:
1. Read through all instructions before beginning.
2. I used Sensations Rainbow Classic.
3. Actual measurements: Small = 22 inch circumference and 18 inch length. Medium = 24 inch circumference and 19 inch length. Large = 26 inch circumference and 20 inch length.
4. The photo shows small and large sleep sacks.
INSTRUCTIONS:
Round 1: Ch 3, (do not count as first hdc) 9 hdc in the 3rd ch from hook. Join with a slipstitch in first hdc. (9 sts)
Round 2: Ch 2, 2 hdc in each st. Join with a slipstitch in first hdc. (18 sts)
Round 3: Ch 2, *hdc in 1 st, 2 hdc in next st. Repeat from * around. Join with a slipstitch in first hdc. (27 sts)
Round 4: Ch 2, *hdc in 2 sts, 2 hdc in next st. Repeat from * around. Join with a slipstitch in first hdc. (36 sts)
Round 5: Ch 2, *hdc in 3 sts, 2 hdc in next st. Repeat from * around. Join with a slipstitch in first hdc. (45 sts)
Round 6: Ch 2, *hdc in 4 sts, 2 hdc in next st. Repeat from * around. Join with a slipstitch in first hdc. (54 sts)
Round 7 (small only): Ch 2, *hdc in 8 sts, 2 hdc in next st. Repeat from * around. Join with a slipstitch in first hdc. (60 sts)
For small continue with rounds 9-12.
Round 7 (medium only): Ch 2, *hdc in 8 sts, 2 hdc in next st. Repeat from * around. Join with a slipstitch in first hdc. (60 sts)
Round 8 (medium only): Ch 2, *hdc in 9 sts, 2 hdc in next st. Repeat from * around. Join with a slipstitch in first hdc. (66 sts)
For medium continue with rounds 9-12.
Round 7 (large only): Ch 2, *hdc in 5 sts, 2 hdc in next st. Repeat from * around. Join with a slipstitch in first hdc. (63 sts)
Round 8 (large only): Ch 2, *hdc in 6 sts, 2 hdc in next st. Repeat from * around. Join with a slipstitch around the first hdc as if to front post. (72 sts)
Rounds 9-10 (all sizes): Ch 2 (counts as the first fphdc), fphdc around next 2 sts, bphdc around next 3 sts. *Fphdc around next 3 sts, bphdc around next 3 sts. Repeat from * around. Join with a slipstitch around the ch 2. (60, 66, 72 sts)
Rounds 11-12(all sizes): Ch 2 (counts as the first bphdc), bphdc around next 2 sts, fphdc around next 3 sts. *Bphdc around next 3 sts, fphdc around next 3 sts. Repeat from * around. Join with a slipstitch around the ch 2. (60, 66, 72 sts)
Repeat rounds 9-12 until sleep sack depth measures Sm 18, Med 19, Lg 20 inches.
Cuff:
Round 1-2: Ch 1, sc in each st. (60, 66, 72 sts)
Fasten off, weave in ends.
BASKET WEAVE CAP INSTRUCTIONS:
SIZE: 15-16 inches
Round 1: Ch 3, (do not count as first dc) 9 hdc in the 3rd ch from hook. Join with a slipstitch in first hdc. (9 sts)
Round 2: Ch 2, 2 hdc in each st. Join with a slipstitch in first hdc. (18 sts)
Round 3: Ch 2, *hdc in 1 st, 2 hdc in next st. Repeat from * around. Join with a slipstitch in first hdc. (27 sts)
Round 4: Ch 2, *hdc in 2 sts, 2 hdc in next st. Repeat from * around. Join with a slipstitch in first hdc. (36 sts)
Round 5: Ch 2, *hdc in 5 sts, 2 hdc in next st. Repeat from * around. Join with a slipstitch around the first hdc as if to front post. (42 sts)
Rounds 6-7: Ch 2 (counts as the first fphdc), fphdc around next 2 sts, bphdc around next 3 sts. *Fphdc around next 3 sts, bphdc around next 3 sts. Repeat from * around. Join with a slipstitch around the ch 2. (42 sts)
Rounds 8-9: Ch 2 (counts as the first bphdc), bphdc around next 2 sts, fphdc around next 3 sts. *Bphdc around next 3 sts, fphdc around next 3 sts. Repeat from * around. Join with a slipstitch around the ch 2. (42 sts)
Repeat rounds 6-9 once.
Cuff:
Rounds 1-2: Ch 1, sc in each st. Join with slipstitch in first sc. (42 sts)
Fasten off, weave in ends.
COLLARETTE DAHLIA SCRUNCHIE
Collarette dahlias are one of my favorite flowers. So it's no surprise that I would want to make a scrunchie that resembles those beauties.
Dahlia Collarette description: One row of flat or slightly cupped petals surrounding a disc. These flowers have an inner set of petaloids generally multiple and irregular forming a collar around the disc.
COLLARETTE DAHLIA SCRUNCHIE
MATERIALS:
Worsted weight yarn, less than .5 ounce
I (5.5 mm) crochet hook
Ouchless (no metal) ponytail elastic, 1.25 (1.5) inch diameter
Tapestry needle
NOTES:
1. Read instructions all the way though before beginning.
2. For the first round If you want to use a longer elastic sc the number of stitches to half cover the elastic..
3. I used Red Heart Super Saver scraps.
INSTRUCTIONS:
Round 1: Attach yarn around elastic with a sc. *Ch 5, sc around elastic. Repeat from * 8 (12) times. Remember this round you only want to half fill the elastic. End with ch 5. DO NOT join, fasten off. Use your tapestry needle to join in the first sc of this round. (10, 14 loops)
Round 2: Working behind round 1. Attach second color yarn, with a sc in the space between two sc of round 1. (Ch 8, slipstitch in the side of the sc just made) 2 times.
*Ch 8, sc in space between the next 2 sc of round 1. (Ch 8, slipstitch in the side of the sc) 2 times. Repeat from * around. End with ch 8, fasten off and use your tapestry needle to join in the first sc of this round.
With beginning and ending tails tie a tight knot and weave in ends.
Dahlia Collarette description: One row of flat or slightly cupped petals surrounding a disc. These flowers have an inner set of petaloids generally multiple and irregular forming a collar around the disc.
COLLARETTE DAHLIA SCRUNCHIE
MATERIALS:
Worsted weight yarn, less than .5 ounce
I (5.5 mm) crochet hook
Ouchless (no metal) ponytail elastic, 1.25 (1.5) inch diameter
Tapestry needle
NOTES:
1. Read instructions all the way though before beginning.
2. For the first round If you want to use a longer elastic sc the number of stitches to half cover the elastic..
3. I used Red Heart Super Saver scraps.
INSTRUCTIONS:
Round 1: Attach yarn around elastic with a sc. *Ch 5, sc around elastic. Repeat from * 8 (12) times. Remember this round you only want to half fill the elastic. End with ch 5. DO NOT join, fasten off. Use your tapestry needle to join in the first sc of this round. (10, 14 loops)
Round 2: Working behind round 1. Attach second color yarn, with a sc in the space between two sc of round 1. (Ch 8, slipstitch in the side of the sc just made) 2 times.
*Ch 8, sc in space between the next 2 sc of round 1. (Ch 8, slipstitch in the side of the sc) 2 times. Repeat from * around. End with ch 8, fasten off and use your tapestry needle to join in the first sc of this round.
With beginning and ending tails tie a tight knot and weave in ends.
Saturday, February 12, 2011
SIMPLE SCRUNCHIE
SIMPLE SCRUNCHIE
MATERIALS:Chunky Weight yarn, approximately .5 ounces
J (6.0 mm) crochet hook
Ouchless (no metal) ponytail elastic, 1.25 (1.5) inch diameter
Tapestry needle
NOTES:
1. Read instructions all the way though before beginning.
2. If you want to use the longer elastic sc the number of stitches to cover the elastic, don’t stretch the elastic as you work over it.
3. I used Bernat Softee Chunky.
INSTRUCTIONS:
Attach yarn around elastic with a sc. *Ch 9, sc around elastic. Repeat from * around. You want to fill the elastic, but not stretch it. I made 24 sc on the 1.5 inch elastic. End with ch 9, fasten off. Use your tapestry needle to join in the first sc.
With beginning and ending tails tie a tight knot. Rather than weave in the ends, put a drop of glue on the knot. After the glue dries trim the ends about ¼ inch away from knot.
Of course if you want to you can weave in the ends.
Thursday, February 10, 2011
SHAMROCK BOOKMARK
SHAMROCK BOOKMARK
SIZES:Large = 2 by 13 inches
Medium = 1 5/8 by 13 inches
Small = 1 by 12 inches
STITCHES USED:Ch = chain
Tr = treble crochet
Dc = double crochet
Sc = single crochet
MATERIALS:
Large: Worsted weight yarn
Size H (5.0 mm) crochet hook
Medium: Sports weight yarn or size 3 thread
Crochet hook size F (4.0 mm) for yarn E (3.5 mm) for thread
Small: Size 10 thread
Size 7 (1.5 mm) steel crochet hook
Tapestry needle sized for your thread/yarn
NOTES:1. Read instructions all the way through before beginning.
2. I tried to find size 3 crochet thread in a good green, but it must not be the right season for “Christmas” green. So I settled for RH Sports Weight in Paddy Green. If you can find it the cotton works up much nicer.
SHAMROCK INSTRUCTIONS:Chain 4, join with a slipstitch in first chain to form a ring.
Work over the yarn tail as you work into the ring. *Ch 3, tr, dc, tr, ch 3, slip stitch in ring. Repeat from * twice. (3 leaves)
BOOKMARK TAIL:Ch 40 (S), 55 (M), 70 (L), sc in the 10th ch from hook to form ring. *Ch 4, skip 4 chs, sc in next ch. Repeat from * until 5 chains remain, sc in last chain.
Fasten off.
Weave in ends.
TASSEL:Cut 6 strands of thread about 6 inches long. Fold in half and draw loop through the ring at end of tail with a crochet hook. Draw the loose ends of the strands through the loop and pull them down tightly to form a knot. Trim ends of tassel evenly.
OPTIONAL BLOCKING:If you used cotton thread or yarn you probably want to block. Mix 1 part vinegar with 5 parts water. Wet the bookmark with the vinegar solution. Squeeze out excess and lay on a towel. Shape the shamrock and tail, allow to dry.
SIZES:Large = 2 by 13 inches
Medium = 1 5/8 by 13 inches
Small = 1 by 12 inches
STITCHES USED:Ch = chain
Tr = treble crochet
Dc = double crochet
Sc = single crochet
MATERIALS:
Large: Worsted weight yarn
Size H (5.0 mm) crochet hook
Medium: Sports weight yarn or size 3 thread
Crochet hook size F (4.0 mm) for yarn E (3.5 mm) for thread
Small: Size 10 thread
Size 7 (1.5 mm) steel crochet hook
Tapestry needle sized for your thread/yarn
NOTES:1. Read instructions all the way through before beginning.
2. I tried to find size 3 crochet thread in a good green, but it must not be the right season for “Christmas” green. So I settled for RH Sports Weight in Paddy Green. If you can find it the cotton works up much nicer.
SHAMROCK INSTRUCTIONS:Chain 4, join with a slipstitch in first chain to form a ring.
Work over the yarn tail as you work into the ring. *Ch 3, tr, dc, tr, ch 3, slip stitch in ring. Repeat from * twice. (3 leaves)
BOOKMARK TAIL:Ch 40 (S), 55 (M), 70 (L), sc in the 10th ch from hook to form ring. *Ch 4, skip 4 chs, sc in next ch. Repeat from * until 5 chains remain, sc in last chain.
Fasten off.
Weave in ends.
TASSEL:Cut 6 strands of thread about 6 inches long. Fold in half and draw loop through the ring at end of tail with a crochet hook. Draw the loose ends of the strands through the loop and pull them down tightly to form a knot. Trim ends of tassel evenly.
OPTIONAL BLOCKING:If you used cotton thread or yarn you probably want to block. Mix 1 part vinegar with 5 parts water. Wet the bookmark with the vinegar solution. Squeeze out excess and lay on a towel. Shape the shamrock and tail, allow to dry.
CHRYSANTHEMUM SCRUNCHIE
CHRYSANTHEMUM SCRUNCHIE
Thank you Shirley L, Bug and Lois K for testing this pattern.
Thank you Shirley L, Bug and Lois K for testing this pattern.
MATERIALS:
Worsted Weight yarn, approximately .5 ounce
I (5.5 mm) crochet hook
Small Ouchless (no metal) ponytail elastic, 1.25 (or 1.50) inch diameter
Tapestry needle
NOTES:
1. Read instructions all the way though before beginning.
2. If you want to use the longer elastic sc the number of stitches to cover the elastic, don’t stretch the elastic as you work over it.
INSTRUCTIONS:
Round 1: Attach yarn around elastic with a sc, 17 (23) sc around elastic. Join in first sc with a slipstitch. (18 or 24 sts)
Round 2: (Ch 9, slipstitch in same st as join), 2 times. *Ch 9, slipstitch in next st, (Ch 9 slipstitch in same st) 2 times. Repeat from * around. End with ch 9, DO NOT join, fasten off and use your tapestry needle to bring tail through the join from round 1.
With beginning and ending tails tie a tight knot and weave in ends.
Friday, February 04, 2011
FOAM HEART VALENTINE
FOAM HEART VALENTINE
MATERIALS:Craft foam heart
Size 10 crochet thread
Size 7 (1.5 mm) steel crochet hook
1/16 inch hole punch
NOTES:1. Read instructions all the way through before beginning.
2. Depending upon how far apart your holes turn out you may need to ch 2 between the sc.
3. The heart in the photo measures 4.5 inches across.
INSTRUCTIONS:
Prep the heart:On the back side lightly draw a line about 1/8 inch from the edge. Then punch holes every quarter inch using the line as your guide.
Crocheting the edging:
Round 1: Attach thread with a sc in the hole just to the left of the dip. *Ch 1, sc in next hole. Repeat from * around, except work 3 sc in hole at tip of heart. Join in the first sc with a slipstitch.
Round 2: Sc in 2 sts, 2 dc, ch 2, 2 dc in next stitch. *Skip one sc, 2 dc, ch 2, 2 dc in next sc. Repeat from * around, to last 2 sts, sc in 2 sts. Join with a slipstitch in the first sc.
Fasten off and weave in the ends.
Write your message on the heart with a permanent marker.
VALENTINE CARD
MATERIALS:Greeting CardSize 10 crochet thread
Size 7 (1.5 mm) steel crochet hook
1/16 inch hole punch
NOTES:1. Read instructions all the way through before beginning.
2. Depending upon how far apart your holes turn out you may need to ch 2 between the sc.
INSTRUCTIONS:
Prep the card:With a pencil lightly draw a heart, circle or oval around the picture on the card. Cut out the shape, cutting just inside the pencil marks. On the back side draw a line about 1/8 inch from the edge. Then punch holes every quarter inch using the line as your guide.
Crocheting the edging:
Round 1: Attach thread with a sc in the hole just to the left of the dip. *Ch 1, sc in next hole. Repeat from * around, except work 3 sc in hole at tip of heart. Join in the first sc with a slipstitch.
Round 2: *Skip ch, 3 dc in next sc, slipstitch in next sc. Repeat from * around. Join with a slipstitch in the beginning slipstitch.
Fasten off and weave in the ends.
SOUL MATE VALENTINE
SOUL MATE VALENTINE
MATERIALS:Insole (small)
Size 3 crochet thread
Size C (2.5 mm) crochet hook
1/8 inch hole punch
NOTES:1. Read instructions all the way through before beginning.
2. Depending upon how far apart your holes turn out you may need to ch 2 between the sc.
3. You may need to use you own judgment about how many sts to skip between the 2 dc, ch 2, 2 dcs.
4. On the curves of the toe and heel use your own judgment, I didn’t skip a sc on those curves.
INSTRUCTIONS:
Prep the insole:
On the wrong side, with a pencil, lightly draw a line about 1/4 inch from the edge. Then punch holes every quarter inch just on the line.
Crocheting the edging:
Round 1: Attach thread with a sc in one of the holes. *Ch 1, sc in next hole. Repeat from * around. Join in the first sc with a slipstitch.
Round 2: Ch 3, dc, ch 2, 2 dc in same stitch. *Skip one sc, 2 dc, ch 2, 2 dc in next sc. Repeat from * around. On the curves of the toe and heel use your own judgment, I didn’t skip a sc on those curves. Join with a slipstitch in the top of the beginning ch 3.
Fasten off and weave in the ends.
Write your message on the insole with a permanent marker.
U R MY SOUL MATE
YOU ARE MY SOUL MATE
YOU ARE MY SOLE MATE
I LOVE U HEART AND SOUL
I LOVE YOU HEART AND SOUL
I LOVE YOU HEART AND SOLE
